The AT2035 is beloved by vocalists, bands, recording artists as well as podcasters, voice over professionals and online content makers.
Designed for critical home/project/professional studio applications and live performance, this side-address cardioid studio condenser delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. Along with its rugged construction and high-performance specifications, the AT2035 provides an exceptional level of consistency from model to model. It comes equipped with a protective pouch and a custom shock mount.
Constructed with premium materials and unrivalled Japanese engineering and design, the AT2035 features a full-metal, aluminium chassis and steel mesh grille – it is built to last. The included premium, leather effect, padded zip case means you can transport the AT2035 easily, safely and confidently. The seamless simplicity of the AT2035 means all you have to do is hook up to your preamp with an XLR cable (not included) and you’re good to go.
Features
-
AT2035:
- Microphone Type: Large Cardioid Condenser
- Output Connector: Integral 3-pin XLRM-type
- Phantom Power Requirements: 11-52V DC, 3.8 mA typical
- Accessories Included: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
- Large diaphragm for smooth, natural sound and low noise
- High SPL handling and wide dynamic range provide unmatched versatility
- Custom shock mount provides superior isolation
- Switchable 80 Hz high-pass filter and 10 dB pad
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Includes custom shock mount & protective pouch
| Element | Fixed-charge back plate, permanently polarized condenser |
|---|---|
| Polar Pattern | Cardioid |
| Frequency Response | 20 - 20,000 Hz |
| Low Frequency Roll Off | 80 Hz, 12 dB/octave |
| Open Circuit Sensitivity | -33 dB (22.4 mV) re 1V at 1 Pa |
| Maximum Input Sound Level | 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal) |
| Dynamic Range | 136 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio | 82 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements | 11-52V DC, 3.8 mA typical |
| Weight | 403g |
| Dimensions | 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter |
| Output Connector | Integral 3-pin XLRM-type |
| Accessories Included | AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch |
Due to ongoing product development efforts, specifications are subject to change without notice.
SIMILAR PRODUCTS
